Krone BigX 1100 BeastPack


Cutting-edge engine technology from MAN takes power and economy to a new dimension. Common Rail injection and the single engine concept lead to quiet running, low fuel consumption, high effi ciency and lowest maintenance. The innovative KRONE Power Management system allows operators to switch from Eco Power mode to X Power mode and vice versa and adjust engine output to current requirements.

Eco Power is available on the BiG X 1100 and is used in situations where it is not necessary to operate the forager at full power. When the situation changes and the engine power requirement increases, simply select X Power by pushing a button. The system gives you the flexibility to respond to the job at hand and helps you reduce fuel consumption and save the environment.

The Beast Pack project have been around for almost 4 years, restive, the pack has evolved and improved. It is equally proceed. So up to this point first thanks to all of you who helped with the Site and to the people to realize the project.

Krone BigX 1100 Beast
Krone EasyFlow Pickup
ÜLW dolly axle Cargp3 prototype
Krone EasyCollect Maisgebiss
XDisc cutter for Grass and Grain
Krone Schneidwerkswagen
Header Trailer
MAN TGS 8x8 agricultural

! Please also pay attention to the right device for you if what you want on / switch, the Hud note in the upper left corner and the it!
(Must be BigX selected) IC Control button KEY_R_CTRL
(Must be BigX selected) Twin wheels button KEY_KP8
(Must be BigX selected) chains Trac Soucy button KEY_KP7
Counterweight on (BigX must be selected) button KEY_B
Counterweight off (must be BigX selected) button KEY_X
Pipe show (must be BigX selected) Press O
(Must be BigX selected) silage tank in / out without function key L
Open and close button Dolly bunker (Cargo must be Dolly selected) KEY_M
Dolly bunker rotate (Dolly Cargo must be selected) Press X
Dolly bunker ÜLW Trailerlift axis (Dolly Cargo must be selected)  KEY_v
ATTENTION Dolly can be folded on street only empty !!!
MAN TGS agricultural attacher coupling high (MAN must be selected) button KEY_5
MAN TGS agricultural attacher clutch down (MAN must be selected) button KEY_6
MAN Bergmann Trailer prop left high (Bergmann must be selected) button KEY_n
MAN Bergmann Trailer prop left down (Bergmann must be selected) button KEY_j
MAN Bergmann trailer prop right up (Bergmann must be selected) button KEY_m
MAN Bergmann trailer prop right down (Bergmann must be selected) button KEY_L
ATTENTION operation of the supports on the outside of the switches (see picture)

v12.0 April 2015
Upsidedown, xyzspain, JokobT, Johnny1980, Repi, Kyosho, Rafftnix, Biedens, Bullgore

v11.1 April 2014
by Bullgore, Kubo, JoakobT
- Schemas angepasst
- Attacher für SWW angepasst
- Attacher EasyFlow angepasst
- Optische Fehler behoben.( Sichtbare Achse )
- Fehler beim "zurücksetzen" behoben
- Maiseinzug PS EasyCollect angepasst
- Dolly ÜLW Scripte überarbeitet
- Dolly ÜLW Gewicht Ladung angepasst
- Dolly ÜLW kann nur noch leer zusammengeklappt werden
- Fahrverhalten BIGX komplett überarbeitet, Motor, Bremse, Federung, Schwerpunkt, Lenkung usw.


v11.0 Jun 2013/ April 2014
by Bullgore, Eribus, Biedens, Upsidedown, Kubo
- Patch Giants 2.1 rdy
- Sound Fehler behoben
- aiautocombine.lua dolly überarbeitet für Autocombine
Waschbar, dauert 5 Stunden
- Odometer deaktiviert, gibt es Global siehe MIG-Map Pack
- Dirt Texturen erstellt
- Sound Fehler behoben
- Gewicht korrekt eingestellt, durch die Luft fliegen ist nun behoben
- XDisc Klee und Luzerne rdy
- Sound Lautstärke angepasst
- Allrad deaktiviert
- l10n Fehler behoben
- Ketten schweben nicht mehr
- I3D´s und XML aufgeräumt, umbenannt etc
- Shopdaten überarbeitet

Krone big X 1100 BeastPack
Krone big X 1100 BeastPack
Version: 12.10
244.4 MB

Leave a Reply

Your email address will not be published. Required fields are marked *